Loading...
Primarily used in fabrication operations to cut out components from sheet materials, punch and die sets consist of multiple punches and corresponding dies in various sizes. During fabrication operations, a punch and its matching die are installed within a punch press, which pushes the punch through the sheet material into the die. The component may be processed by several different sets of punches and dies to achieve its final shape and size. Afterwards, it may be subjected to shearing, crimping, or rolling operations for further refinement.
- Hardened and ground Punch Holder
- High tensile punch nut, bolster and spanner
- Slotted and square punches, located with key
- Punches and dies from 03.0mm to 32.0mm
- All other shapes and sizes made to order
- Three die clearances 0.2, 0.7, 1.2mm
To fulfil your order, we will require the information below.
Then all you need to do is send your order information to customercare@wolfmach.com
